Custom PU Business Laptop Backpack
- Private label corporate commuter backpack programs.
- B2B laptop bag lines for office supply distributors.
- University and student laptop carry programs.
- Branded business travel accessory collections.
- Suspended Laptop Vault: 8mm foam padding with 3cm base clearance and velvet lining for scratch protection.
- Executive Matte PU Shell: Wipe-clean surface rated to 2000mm water column and 8,000 Martindale abrasion cycles.
- Ergonomic Carry System: S-curve straps with 12mm EVA foam and 3D mesh back panel for extended wear comfort.
- OEM Branding Ready: Debossed or embossed logos, custom hardware plating, and USB port integration at 500 MOQ.
Backpack Production Facility Tour
Explore our ISO-certified manufacturing lines, featuring a 15,000-unit monthly throughput dedicated to business and laptop backpack assembly.
Factory Capabilities: Automated CNC Fabric Cutting | Precision Foam Lamination | Industrial Bar-tack Reinforcement | Comprehensive Load & Stress Testing
Product FAQ
Technical details for procurement teams
Direct Answer: The laptop compartment is wrapped in 8mm high-density foam on all sides, suspended 3cm off the bag bottom with a velvet liner, and tested to 1.2m drop protection for 15.6-inch devices.
- Padding: 8mm high-density foam
- Suspension: 3cm off bottom
- Drop Protection: 1.2m
- Device Size: 15.6-inch
Direct Answer: Matte PU gives an executive look with a 2,000mm water rating, wipes clean with a damp cloth, and lasts through 8,000 Martindale abrasion cycles — holding its appearance longer than nylon in daily urban use.
- Hydrostatic Head: 2,000mm
- Cleaning: Wipes with damp cloth
- Abrasion: 8,000 Martindale cycles
Direct Answer: The pack weighs 890g empty — about 20% lighter than comparable PU business packs — with S-curve straps in 12mm EVA and a 3D mesh back panel that reduces sweat on 30+ minute commutes.
- Empty Weight: 890g
- Weight Saving: ~20% vs comparable PU packs
- Straps: S-curve, 12mm EVA
Direct Answer: At 500 MOQ you can adjust dimensions, Pantone-match colors, add debossed or embossed logos, choose metal hardware finishes, configure interior pockets, and integrate a USB charging port — with no mold fees on standard branding and a 7-day sample.
- MOQ: 500 pcs
- Logo: Deboss / emboss
- Feature: USB charging port
- Sample Lead Time: 7 days
Direct Answer: Every batch undergoes a 10,000-cycle zipper test, a 20kg 8-hour load test, a 1.2m laptop-compartment drop, 8,000 Martindale abrasion cycles, and a 40kg seam pull — targeting a sub-1% defect rate.
- Zipper Test: 10,000 cycles
- Load Test: 20kg for 8 hours
- Drop Test: 1.2m
- Target Defect Rate: Under 1%
Request Project Quote
Engineering feedback within 8 hours. Sample dispatch within 7 days.


