Custom Logo Insulated Cooler Bags (5L - 15L)
Custom Logo Insulated Cooler Bags (5L - 15L) is a made-to-order insulated bag configuration for B2B brands, developed from approved dimensions, materials, colors and logo artwork.
- Trade show and event giveaways where a printed logo travels with the attendee all day.
- Corporate promo kits combining drinks, snacks or branded merchandise.
- Hotel and hospitality welcome kits needing a compact branded cold bag.
- Not the best fit: heavy daily commuter lunch or school use — see the drawstring commuter lunch bag; this is a passive promo pouch, not a hard cooler.
- Flat-panel registration control point: our QC lays the foil shell flat under a tensioned platen before screen printing, so the logo registers without the foil wrinkles that throw color off on a curved pouch.
- Waterproof shell: the aluminum-foil composite exterior resists water, so the bag carries ice packs and wet bottles without soaking through.
- Multi-volume line: 5L, 10L and 15L share one production line, so a single brand can roll out a full size family at one MOQ.
- Made to order: 500-piece MOQ, sample about 7 days, production 30 days after approval. No warehouse stock.
🔬 Merris Factory Thermal Retention Test Protocol
| Test Condition | Initial Temp | Temp at 4 Hours | Temp at 8 Hours |
|---|---|---|---|
| 25°C Ambient, 8mm EPE Foam + PEVA | 2.0°C (Ice Pack) | 5.8°C | 9.4°C (< 10°C Safety Threshold) |
* Tested according to Merris Internal QA Protocol #TP-2026-COOLER. Results validated per batch.
Custom Logo Cooler Bag Production & Printing Line
A look at our foil-laminate cooler bag line, from shell cutting and thermal lining sealing to automated logo screen printing.
Factory Capabilities: Auto Logo Screen Printing | Foil Liner Sealing | Cold Retention Testing | QC Inspection
Product FAQ
Technical details for procurement teams
Direct Answer: We offer silk-screen printing, heat transfer and small woven labels. The front and side panels are kept flat during production specifically for clean logo application, and colors are confirmed on the pre-production sample.
- Printing: silk-screen, heat transfer, woven label
- Areas: flat front + side panels
- MOQ: 500 pcs
Direct Answer: The series comes in 5L (21 x 14 x 15 cm), 10L and 15L. You can mix sizes within one order, and custom dimensions are available within the 500-piece MOQ.
- 5L: 21 x 14 x 15 cm, single lunch box
- 10L / 15L: small picnic / day drinks
- Mixing: sizes mixable at 500 pcs
Direct Answer: Yes. The outer shell is an aluminum-foil composite that sheds water, so the bag can carry ice packs, wet bottles and cold drinks without soaking through.
- Shell: waterproof aluminum-foil composite
- Use: ice packs, wet bottles, condensation
- Limit: splash-proof, not submersible
Direct Answer: Yes. The reflective foil lining works both ways, slowing heat loss for warm meals and blocking outside heat for cold drinks. It is a passive insulator, not a heated or chilled device.
- Cold: blocks outside heat for drinks
- Warm: slows heat loss for meals
- Per-SKU: hold confirmed per project, thermal report on request
Direct Answer: Samples with logo proofing take about 7 days, and mass production runs 30 days after sign-off. We ship FOB Shenzhen, and the sample fee is refundable against the bulk order.
- Sample: about 7 days incl. logo proofing
- Production: 30 days after sign-off
- Port: FOB Shenzhen
Request Your Thermal Bag Quote
Receive material samples, thermal test data, and pricing within 8 hours.
FOB reference price is shown for indexing purposes only; final unit price is confirmed on the order sheet after specification sign-off.


